LANP CABLE INDUSTRIAL LIMITED · Cable manufacturer since 2003
LANP Cable Request A Quote
2C Flat Telephone Cable — Telephone Cable manufactured by LANP CABLE

Product photograph supplied by the factory. Colour and print are set per order.

Telephone Cable

2C Flat Telephone Cable

Flat Telephone Wire Cable Lead 2 Pin for ADSL DSL Router Modem Phone Cable

2C Flat Telephone Cable sits in the LANP Telephone Cable range as a 2 core build. The factory specification for this line reads: Flat Telephone Wire Cable Lead 2 Pin for ADSL DSL Router Modem Phone Cable.

It is available from a 100 m sample reel through to 50,000 m production runs, with typical bulk lead times of 3-7 days.

CategoryTelephone Cable
Cores2 core
MOQ100 m
Lead Time3-7 days
Get A Quote On WhatsApp Email This Specification

Reply within 24 hours, including weekends · OEM jacket printing from 1 km · T/T, L/C, Western Union, Escrow

Key Benefits

Why Buyers Specify This Line

Flat Profile

Flat construction on 2C Flat Telephone Cable means it can be run where there is no depth for a round cable, without chasing the wall any deeper than necessary.

2 Core Build

2C Flat Telephone Cable is a 2 core build. Core count is fixed the moment the cable is in the wall, so it is worth ordering spare capacity rather than a second pull later.

OEM Branding Available

From 1 km we print your brand on 2C Flat Telephone Cable rather than putting a sticker on the carton. Packaging design support comes with it.

Tested Before It Ships

Each production lot of 2C Flat Telephone Cable is measured before packing. That is how the second order matches the sample you approved on the first.

Technical Data

Specification Sheet

Values below are the factory specification for 2C Flat Telephone Cable. Anything not listed is confirmed against the production line before quoting rather than estimated.

Product Name2C Flat Telephone Cable
CategoryTelephone Cable
Cores2 core
ProfileFlat / figure-8
MOQ100 m sample reel, up to 50,000 m per production run
Lead Time3-7 days for bulk production
OEMJacket printing from 1 km, custom packaging available
OriginJieyang, Guangdong, China

Technical Features

  • Manufactured on the LANP telephone cable line in Jieyang, China
  • Jacket printed with specification and rating as standard

Materials

  • Conductor and jacket materials confirmed per order against the line specification

Who It Is For

  • Telecom engineers doing installation and fault work
  • Building maintenance teams extending voice points
  • Door entry installers using low-core signal runs
  • Distributors stocking the voice accessory range

Problems It Solves

  • Drop wire stretching and failing at the termination point
  • Flat cable used for an external run where it will not last
  • Jumper wire too thick to dress neatly on a frame
  • Core count that does not match an existing socket wiring scheme

Application Scenarios

  • Extension runs from socket to handset
  • Modular leads inside offices and homes
  • Pole-to-building drops on copper networks
  • MDF and cabinet jumpering
Manufacturing

How This Cable Is Built And Checked

Copper drawing from 8 mm rod

Stranding at controlled lay length

Insulation extrusion at controlled thickness

Jacket extrusion with inline diameter control

Continuity, resistance and dielectric testing

Reeling and packing

Quality Control

  • Conductor resistance measured on every batch
  • Continuity tested end to end before reeling
  • Dielectric strength tested on the finished cable
  • Jacket continuity checked by spark tester
Finished cable reels awaiting inspection at LANP CABLE
Finished reels staged for inspection before packing.
Customisation

What Can Be Changed On This Line

  • Jacket printing with your brand from 1 km per specification
  • Jacket and core colours set per order to match your market's code
  • Custom reel and coil lengths on production runs
  • Box artwork, reel labels and bag printing produced to your design

Compared With Nearby Specifications

AlternativeHow it differs
4 Wire Telephone CableSame construction with a different core count: 2 core here against 4 core. Core count is fixed once the cable is in the wall, so allow spares.
4C Flat Telephone CableSame construction with a different core count: 2 core here against 4 core. Core count is fixed once the cable is in the wall, so allow spares.
Use Guide

Installing It Without Losing Performance

  • Follow the pair colour code on 2C Flat Telephone Cable end to end and record the pair allocation at both termination points before closing the cabinet.
  • Leave a service loop at each 2C Flat Telephone Cable termination so the cable can be re-worked without a splice.
  • Before committing volume on 2C Flat Telephone Cable, take a sample reel and verify it on your own site.

Before a first bulk order of 2C Flat Telephone Cable: request a sample reel. The approved sample becomes the reference every later production lot of this specification is checked against.

Related Products

Other Specifications In The Telephone Cable Range

See all 8 telephone cable products →

Telephone Cable2 Wire Telephone Cable — Telephone Cable manufactured by LANP CABLE

2 Wire Telephone Cable

voice and data round 2 wire telephone cable solid bare copper white

White
View specification →
Telephone Cable4 Wire Telephone Cable — Telephone Cable manufactured by LANP CABLE

4 Wire Telephone Cable

Internal 4 Core Telephone Wire Cable HYA 4x0.5mm Solid Copper White 100M

4 coreWhite
View specification →
Telephone Cable4C Flat Telephone Cable — Telephone Cable manufactured by LANP CABLE

4C Flat Telephone Cable

28 AWG Copper Core 4 Conductor Flat Modular Line Telephone Cord Cable

28 AWG4 core
View specification →
Telephone Cable6C Flat Telephone Cable — Telephone Cable manufactured by LANP CABLE

6C Flat Telephone Cable

6 Core Flat Telephone Silver Satin Modular Cable

6 coreSilver Satin
View specification →

Related guides

Questions

2C Flat Telephone Cable — Questions

What packing formats are available for 2C Flat Telephone Cable?

Packing for 2C Flat Telephone Cable is decided with the order — reels, coils or cartons, in whatever unit length suits the installers.

Can you print our brand on 2C Flat Telephone Cable?

From 1 km we extrude your brand onto the 2C Flat Telephone Cable jacket itself. Under that minimum the branding goes on packaging instead.

What is the minimum order and lead time for 2C Flat Telephone Cable?

A trial reel of 100 m is enough to evaluate 2C Flat Telephone Cable. Production runs go to 50,000 m and take about 3-7 days once the PO is confirmed.

Request pricing on 2C Flat Telephone Cable

Send quantity, destination and any custom requirement. MOQ from 100 m, bulk lead time 3-7 days.

Chat on WhatsApp Email UsDownload Catalogue